Installed when a condenser mike is to be used. The A2 audio PCB has an optional resistor (R30 - 10K) to be Provision is made in the mike connector wiring to accommodateĮither an electrect-condenser or air-condenser mike (pin 8) or a Or one or two resistors on the A2 Audio PCB. This may be due to a problem with the microphone, how it's wired Them to the inside of the door over the keypad.Īfter putting up an H.F. There are two levels of password for the radio, one for user The connectors at the top are the rear panelĬonnectors on the RF-3200 brought out on a seperate panel. There is also a rack mount kit/version (see RF-3201 Introduced in 1987 and the phaseout started about 10 years later Luggage size limit since the 15" number includes the handle.īut the weight is probably going to require a penalty. This is inside the 22 x 14 x 9" airline carry on Weighs about 49.5 pounds and is 21" wide x 15" high x 8" Is a Transportable version housed in a black metal Zero Halliburton suitcase If you look at the left figure above youĬan see it at the bottom of the suitcase half. The RT-3200E is a (no longer in production) table topĭigital H.F. Radio maker and is currently supplying a number of Behind the blank panel to the right of the knob
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |